Prepare the artwork.

1. Print a composite image of the artwork
2. Print separations of the artwork
3. One final color per output
4. Black toner on vellum or clear acetate

Process the screen.

1. Tape artwork to the print side of the screen
2. One page per screen
3. Artwork should be in reverse
4. Place into the exposure system with the art facing the lights.
5. Secure the frame
6. Turn on the lights.  Times will vary
7. After times are done, wash with cool water from a pressure hose.

Setting up to print.

1. Secure the art composite onto the platen at the print location.
2. Secure the screens into the clamps.
3. Align the screens to the composite.

Preparing to print

1. Tape the inside edge of the screen.
2. Place squeegees into the screen
3. Add ink

Printing

1. Use the squeegee to flood the screen with ink.  This lays a layer of ink over the image without pushing it through.
2. Use the squeegee for a 2nd pass.  This time push the ink through the image.